Call 01252 214067

Commercial Oven Repair and Servicing

RW Commercial Catering Engineers repairs and services commercial ovens, combi ovens, ranges, fryers, grills and the rest of the cookline, gas and electric, for kitchens across Hampshire, Surrey, Berkshire, Wiltshire and west London. We are Gas Safe registered, and all our engineers hold Rational training. Wherever possible, we aim to reach you within 24 hours on working days.

Which cooking equipment do we repair?

We repair and service all types and brands of commercial cooking equipment, gas and electric:

  • Combination (combi) ovens
  • Convection ovens
  • Speed ovens
  • Oven ranges and boiling tops
  • Fryers
  • Griddles and chargrills
  • Salamander grills
  • Bratt pans and boiling pans
  • Steamers
  • Hot cupboards and bain maries

Our substantial van stock means a commercial oven repair can often be finished on the first visit. If the part is not on the van, we get it through our key parts suppliers.

What are the common commercial oven faults?

Most commercial oven breakdowns come down to heat, ignition, airflow or water. These are the faults our engineers find most often:

  • Not heating, or slow to heat. On an electric oven, usually a failed element, contactor or thermostat. On a gas oven, usually an ignition fault.
  • A gas burner that will not light or stay lit. A worn igniter or electrode, or a faulty flame supervision device. That device stops gas reaching the burner if the flame goes out, so when it fails the burner will not stay lit.
  • Cooking unevenly or at the wrong temperature. A failed fan motor, a drifting thermostat or probe, or a worn door seal letting heat out.
  • A combi oven not steaming or not washing. Limescale in the steam system, a blocked water inlet, a failed pump, or the cleaning chemicals running out.
  • Tripping the electrics. Often an element or a wiring fault, and a job for an engineer.
  • An error code on the display. Note it down before you switch off. It tells the engineer where to start.
Engineer fitting a control board inside a commercial oven

Gas or electric: who can work on a commercial oven?

Work on a gas oven, range, fryer or any other gas catering appliance must be done by a Gas Safe registered business, by engineers who hold certificates of competence for that type of gas equipment.

HSE’s guidance on gas safety in catering says this is a requirement of the Gas Safety (Installation and Use) Regulations 1998. RW Commercial Catering Engineers is Gas Safe registered, number 662257, and our engineers’ Gas Safe ID cards cover commercial catering, natural gas and LPG. Ask to see the card: it lists the work each engineer is qualified to do.

Electric ovens need the same care. Larger electric ovens and combi ovens often run on a three-phase supply, and a fault in the supply can look like a fault in the oven, so our engineers test the supply before replacing parts.

Gas cooking equipment also needs a regular gas safety check. See our CP42 gas safety inspections, or our guide What is a CP42 certificate?

Book a CP42 inspection

Who can service a Rational combi oven?

All our engineers hold Rational training, so we service and repair Rational combi ovens, and we supply and install new Rational equipment.

For a kitchen owner, that means the engineer who services your combi oven can also look after your fryers, ranges, refrigeration and dishwashers on the same visit. If your oven is still under the manufacturer’s warranty, check the warranty terms before you book any repair.

A recent combi oven repair in a care home

A care home’s Bonnet combination oven stopped working. Our engineer opened the control panel and tested the supply at the oven’s terminals, and found that one phase of the electrical supply was down. More about our work in care home kitchens.

A Bonnet Equajet combination oven on its stand in a care home kitchen
The Bonnet Equajet combi oven.
An engineer testing the electrical supply at a combi oven’s terminals with a Fluke tester
Testing the supply at the terminals.

How does oven servicing fit a maintenance contract?

Regular servicing finds worn seals, dirty burners and drifting temperatures before they stop your kitchen. On a planned maintenance contract, each visit to your cooking equipment includes:

  • Electrical safety checks and a full function test.
  • Panels removed to check for leaks, damage or corrosion.
  • Temperatures checked, verified and calibrated.
  • Seals, doors and hinges checked, and greased if necessary.
  • Safety devices tested.
  • Equipment cleaned internally, including burners, venturis and pilots.
  • Gas equipment tested for soundness, working pressures, CO2 levels and flame pictures.
  • A CP42 gas safety certificate issued.

Visits can be once a year, every six months or quarterly, and the same visit can cover your refrigeration and dishwashers. Contract customers get priority, with discounted call out and labour charges, if something breaks down.

Should you repair or replace a commercial oven?

When an element, igniter, fan motor or control board fails, fitting the right part is often quicker and cheaper than buying a new oven. It depends on the age and condition of the appliance and whether parts are still available, and we will tell you honestly which makes more sense.

If replacement is the better choice, we supply and install new cooking equipment, commission it in line with the manufacturer’s instructions and remove and dispose of the old appliance. See our equipment supply and installation service.

Cooking brands we supply and install

We also repair Convotherm, Merrychef, Unox, Alto-Shaam, Pitco, Valentine, Synergy Grill, Hatco and other makes. See all the brands we supply and install.

Kitchens we look after

  • School kitchens
  • Care homes
  • Hotels and conference venues
  • Pubs, restaurants and cafés
  • Sports clubs
  • Council and contract kitchens

One maintenance contract can cover the cooking equipment on every site you run. The counties we cover are listed below.

What our customers say

Rob and the team have provided excellent service across our group of Cafés and Licensed venues. RW Catering provide ongoing updates and prompt attendance to our requests with excellent technical ability and qualifications, live job sheet updates via email really help provide prompt feedback for the various works.

Honesty Group are pleased this helps meet our environmental goals by keeping our premises running efficiently and increasing the life span of our catering equipment. I have no hesitation in recommending RW Catering.

Kevin Witt, Honesty Group

Oven and cookline questions

How quickly can you repair a commercial oven?

Wherever possible, we aim to reach you within 24 hours on working days. Our van stock means we can often fix the fault on the first visit, and if a part is not on the van we source it through our key parts suppliers. Call us on 01252 214067.

Do you repair gas and electric ovens?

Yes. We repair gas and electric ovens, combi ovens, ranges and fryers. RW Commercial Catering Engineers is Gas Safe registered, number 662257, and our engineers are qualified for commercial catering appliances on natural gas and LPG.

Do you service and repair Rational combi ovens?

Yes. All our engineers hold Rational training. We service and repair Rational combi ovens, and supply and install new ones; see our Rational page.

Why is our combi oven not washing?

Check that the cleaning chemicals have not run out and that the water supply to the oven is turned on. If it still will not wash, the cause is often limescale, a blocked water inlet or a failed pump. Note any error code and call us.

Why does our fryer keep tripping its safety thermostat?

The high-limit safety thermostat shuts the fryer down when the oil gets too hot, often because the thermostat that controls the oil temperature has a fault. Stop resetting it and call us, so the fault is found before the fryer is used again.

Do you repair Merrychef and Convotherm ovens?

Yes. We repair all types and brands of commercial cooking equipment, including Merrychef, Convotherm, Unox and Alto-Shaam ovens and Pitco and Valentine fryers.

Oven or fryer down? Call us

The quickest way to reach us is by phone on 01252 214067. Tell us the make and model and what it is doing, and we will arrange a visit. For regular servicing, ask about a maintenance contract.

Contact us

Whether it is a general enquiry or something specific, give us a call or send us a message and we will get straight back to you.

Call us today

01252 214067

service@rwcce.co.uk

Monday to Friday, 9am to 5pm

Report a breakdown
Call 01252 214067 Contact Us